Tungsten Carbide Surface Milling Inserts For Aluminium ingots Machining Featured Image

Tungsten Carbide Surface Milling Insets Kuba ingots Aluminiyam Machining

Inkcazelo emfutshane:

Ulawulo lobungakanani obuchanekileyo
-Ukuhlangabezana neemfuno ezichanekileyo, ukuqinisekisa ukuchaneka nokuchaneka.

Ukuqina okuphezulu kunye noKuchasana nokuqhekeka
-Ukuqinisekisa uzinzo kunye nokuthembeka.

I-Hot Isostatic Pressing (HIP) Inkqubo yeSintering
-Izinto eziphathekayo zixinene ngokufanayo, zinobugcisa bomgangatho ophezulu.

Uveliso oluSebenzayo oluPhezulu
-Umgangatho ongaguqukiyo, uphuculwe ngokubonakalayo ukusebenza kakuhle.

Inkxaso yeeNkcazo ezahlukeneyo kunye neeKhetho zokuLungisa
-Ukubonelela ngeemfuno ezahlukeneyo, ukubonelela ngeendlela ezahlukeneyo zokukhetha.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Inkcazo

Ubuso bokusika umsiki weAluminiyam yeIngot

Isishwankathelo seMveliso:
I-aluminiyam i-ingot face milling cutter yenzelwe ukungqusha umphezulu phambi kokuqengqeleka okushushu
inkqubo aluminiyam ingots.The aluminiyam izinto ubuso milling cutter series ibandakanya rough
abasiki bokusila, abasiki bemilling abachanekileyo, kunye nabasiki bemilling.I-rough milling cutter
isetyenziselwa ukugaya isambuku sezithuba ezirhabaxa.Isisiki sokusila esichanekileyo sisetyenziselwa ukuphucula
umphezulu ogudileyo we-aluminiyam ingots.I-coated milling cutter iphakamisa ukuxhathisa ukunxiba kunye nexesha lokuphila kweencakuba.

Iimpawu zeMveliso:
1, Umphetho wokusila ubukhali, okukhokelela kwindawo egudileyo kwiingot ye-aluminiyam egayiweyo, elungileyo.
processing uzinzo.
23, Umphezulu we-blade unokuguda okuhle, uqinisekisa inkqubo yokusila engancamathiseli kunye nengatshisi.

I-Rugh Milling Cutter:

Ikhowudi yomyalelo	Ubungakanani(mm
Ikhowudi yomyalelo	L	R	d	S	s1
I-JT6206-L	37.4	3	7	8	2

Ikhowudi yomyalelo	Ubungakanani(mm)
Ikhowudi yomyalelo	L	R	S	S1	S2	d	d1
I-JT6206-M	30	3	8	2.4	0.65	8.2	7.2

Gqibezela uMsiki wokuSila:

Ikhowudi yomyalelo	Ubungakanani(mm)
Ikhowudi yomyalelo	L	L1	R	R1	S	S1	d
JT6027	37.4	37.08	3	730	8	2	7.4

Isisiki sokuSila esiQithiweyo:

Uluhlu lweBanga

IBanga	ISO Code	iiPropathi zoomatshini boMzimba (≥)			Isicelo
IBanga	ISO Code	Ukuxinana g/cm3	Ukuqina(HRA)	TRS N/mm2	Isicelo
YG3X	K05	15.0-15.4	≥91.5	≥1180	Ilungele ukuchaneka kwe-machining yentsimbi kunye neentsimbi ezingenayo i-ferrous.
YG3	K05	15.0-15.4	≥90.5	≥1180
YG6X	K10	14.8-15.1	≥91	≥1420	Ilungele ukuchaneka kwe-machining kunye nokugqitywa kwesiqingatha sentsimbi etyhidiweyo kunye neentsimbi ezingenayo i-ferrous, kunye nokulungiswa kwentsimbi yemanganese kunye nentsimbi ecinyiweyo.
YG6A	K10	14.7-15.1	≥91.5	≥1370
YG6	K20	14.7-15.1	≥89.5	≥1520	Ilungele ukugqitywa kwe-semi-ukugqiba kunye ne-rough machining yentsimbi etyhidiweyo kunye ne-alloys ekhanyayo, kwaye ingasetyenziselwa ukucwangciswa kwentsimbi kunye nentsimbi ephantsi.
YG8N	K20	14.5-14.9	≥89.5	≥1500
YG8	K20	14.6-14.9	≥89	≥1670
YG8C	K30	14.5-14.9	≥88	≥1710	Ifanelekile ukugrumba ilitye elijikelezayo kunye ne-rotary impact drilling bits.
YG11C	K40	14.0-14.4	≥86.5	≥2060	Ifanele ukulayita okumile okwetshizili okanye amasuntswana amazinyo angama-conical koomatshini bokwemba amatye obunzima bokujongana nokwakheka kwamatye aqinileyo.
YG15	K30	13.9-14.2	≥86.5	≥2020	Ifanelekile ukuvavanywa kwe-tensile yeentsimbi zetsimbi kunye nemibhobho yensimbi phantsi koxinzelelo oluphezulu.
YG20	K30	13.4-13.8	≥85	≥2450	Ilungele ukwenza isitampu iifa.
YG20C	K40	13.4-13.8	≥82	≥2260	Ilungele ukwenza isitampu esibandayo kunye nokucofa okubandayo kumashishini anje ngeendawo eziqhelekileyo, iibheringi, izixhobo, njl.
YW1	M10	12.7-13.5	≥91.5	≥1180	Ilungele ukuchaneka kwe-machining kunye ne-semi-finishing yensimbi engenasici kunye nentsimbi ye-alloy jikelele.
YW2	M20	12.5-13.2	≥90.5	≥1350	Ifanelekile kwi-semi-finishing yensimbi engenasici kunye nentsimbi ephantsi ye-alloy.
YS8	M05	13.9-14.2	≥92.5	≥1620	Ifanelekile ukuchaneka kwe-iron-based based, i-nickel-based high-temperature alloys, kunye nentsimbi ephezulu.
YT5	P30	12.5-13.2	≥89.5	≥1430	Ifanelekile ukusika intsimbi enzima kunye nentsimbi.
YT15	P10	11.1-11.6	≥91	≥1180	Ifanelekile ukuchaneka kwe-machining kunye ne-semi-finishing yentsimbi kunye nentsimbi.
YT14	P20	11.2-11.8	≥90.5	≥1270	Ilungele ukuchaneka kwe-machining kunye ne-semi-finishing yentsimbi kunye nentsimbi yokuphosa, kunye nesantya sokutya esiphakathi.I-YS25 yenzelwe ngokukodwa imisebenzi yokugaya kwintsimbi kunye nentsimbi.
YC45	P40/P50	12.5-12.9	≥90	≥2000	Ilungele izixhobo zokusika ezinzima, ezibonelela ngeziphumo ezigqwesileyo ekujikeni ngokurhabaxa kwe-castings kunye neentlobo ezahlukeneyo zentsimbi.
YK20	K20	14.3-14.6	≥86	≥2250	Ifanele ukulayita amasuntswana okugrumba amatye ajikelezayo kunye nokugrumba kulwakhiwo oluqinileyo noluqina noko.